http://www.howardscustoms.com/products Information about products created and sold by Howard's Killer Customs http://www.howardscustoms.com/products/detail.asp?id=154 We now produce chopper kickstands with locking ball detent, No Springs to wear out or break. The mounting plates are made from 1/2 inch steel plate and the arm are 5/8 dia. to prevent bending or breakage. They will fit most 4 speed style frames. Use optional location mounting plate (included) to mount anywhere. (Must be welded). Lengths from 6 inch long to 16 inches (measured from pivot point to ground). Styles are plain and dimpled, other styles available at additional cost. They are finished in natural raw steel. Custom Kickstand any length with all related hardware http://www.howardscustoms.com/img/products/Kickstand_DSC01084_1_1.jpg USD 79.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 154 accessories http://www.howardscustoms.com/products/detail.asp?id=154 We now produce chopper kickstands with locking ball detent, No Springs to wear out or break. The mounting plates are made from 1/2 inch steel plate and the arm are 5/8 dia. to prevent bending or breakage. They will fit most 4 speed style frames. Use optional location mounting plate (included) to mount anywhere. (Must be welded). Lengths from 6 inch long to 16 inches (measured from pivot point to ground). Styles are plain and dimpled, other styles available at additional cost. They are finished in natural raw steel. Custom Kickstand any length with all related hardware http://www.howardscustoms.com/img/products/Kickstand_DSC01085_1_2.jpg USD 79.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 154 accessories http://www.howardscustoms.com/products/detail.asp?id=154 We now produce chopper kickstands with locking ball detent, No Springs to wear out or break. The mounting plates are made from 1/2 inch steel plate and the arm are 5/8 dia. to prevent bending or breakage. They will fit most 4 speed style frames. Use optional location mounting plate (included) to mount anywhere. (Must be welded). Lengths from 6 inch long to 16 inches (measured from pivot point to ground). Styles are plain and dimpled, other styles available at additional cost. They are finished in natural raw steel. Custom Kickstand any length with all related hardware http://www.howardscustoms.com/img/products/Kickstand_DSC01086_1_3.jpg USD 79.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 154 accessories http://www.howardscustoms.com/products/detail.asp?id=133 Awesome Spring Front Ends for your customer chopper or Harley Davidson. They are made from mild steel, all tig welded,all front ends feature a 1.25" main tube with a 1" springer bar. All front ends a wide glide style with a wish bone upper springtube.Check out the dual fat tube front end it has both front and back tubes in 1.25" dia, - Beefy!- Available in lengths from 4" under stock to 32" over stock.- Also available twisted, hex dimpled.- All front ends come un-finished, this allows you to choose your choice of finishes.- We can powder coat and chrome - contact for prices. (No.1 Show Chrome $750approx.)- All front ends come with springs, axles, stem nuts and all related hardware, internal stop available.- Made in the USA http://www.howardscustoms.com/img/products/springer_3_1__1.JPG USD 1,050.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 133 accessories http://www.howardscustoms.com/products/detail.asp?id=133 Awesome Spring Front Ends for your customer chopper or Harley Davidson. They are made from mild steel, all tig welded,all front ends feature a 1.25" main tube with a 1" springer bar. All front ends a wide glide style with a wish bone upper springtube.Check out the dual fat tube front end it has both front and back tubes in 1.25" dia, - Beefy!- Available in lengths from 4" under stock to 32" over stock.- Also available twisted, hex dimpled.- All front ends come un-finished, this allows you to choose your choice of finishes.- We can powder coat and chrome - contact for prices. (No.1 Show Chrome $750approx.)- All front ends come with springs, axles, stem nuts and all related hardware, internal stop available.- Made in the USA http://www.howardscustoms.com/img/products/Springer_4a_1.jpg USD 1,050.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 133 accessories http://www.howardscustoms.com/products/detail.asp?id=32 Our sickest creation immortalized in an 18x24" print in full color on heavy stock paper. Hang it on your own shop walls for some motivation. http://www.howardscustoms.com/img/products/Howards_Hubless_Harley_Poster.jpg USD 12.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 32 accessories http://www.howardscustoms.com/products/detail.asp?id=31 Dress up your bike while protecting your legs from hot exhaust with out new billet aluminum heat shield and exhaust tip. Both parts bolt right on using the supplied hardware. Available in Polished, Satin, Anodized Red, Blue other colors available. Styles: Plain, Diamond Plate, Slots or Holes. http://www.howardscustoms.com/img/products/motorcycle_exhaust_tips_aluminium_1.jpg USD 105.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 31 accessories http://www.howardscustoms.com/products/detail.asp?id=30 Protect your leg from burning hot exhaust pipes on your motorcycle with these dress-up, aluminum exhaust heat shields. Bolt right on using the supplied hardware. Available in Polished, Satin, Anodized Red, Blue other colors available. Styles: Plain, Diamond Plate, Slots or Holes. http://www.howardscustoms.com/img/products/motorcycle_exhaust_heat_shield_1.jpg USD 23.99 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 30 accessories http://www.howardscustoms.com/products/detail.asp?id=29 New billet exhaust tips add a totally custom look to any exhaust. Simply slip over existing straight cut pipe. It is secured by a stainless steel screw and lock nut, a is a great way to secure header wrap and give it that racing look. Add our billet heat shield to complete the look. Looks great over black pipes. try our anodized billet exhaust tips over chrome pipes for a creative new look. This series is made for 1 3/4" diameter pipes. Available in 2 inch diameter and 2 1/4". http://www.howardscustoms.com/img/products/billet_chopper_exhaust_tips-7.jpg USD 35.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 29 accessories http://www.howardscustoms.com/products/detail.asp?id=28 This is a carburetor support arm that bolts directly on to most Harley Davidson motors. Dampens vibration and provides a subtle enhancement to your motor's appearance. You can get this item slotted or with holes as shown above. We also have them in longer lengths to accommodate stroker engines as well. http://www.howardscustoms.com/img/products/Carb_Support_00897.jpg USD 10.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 28 accessories http://www.howardscustoms.com/products/detail.asp?id=26 An actual pool ball is taken and threaded 3/8-24 to fit most shifter applications. The main use is for a hand shift and foot clutch "suicide shift". Use on choppers and street rods, work trucks, etc. Specify 3/8-16 and 3/8-24 standard sizes or enter custom sizing during checkout. http://www.howardscustoms.com/img/products/DSC00525.jpg USD 34.99 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 26 accessories http://www.howardscustoms.com/products/detail.asp?id=25 These thumb screws provide easy, no-tools-needed, access to your carb's lower internals for on the road repairs or for tweaking that temperamental carburetor. http://www.howardscustoms.com/img/products/Hex_Float_Bowl_Screws_00560.jpg USD 29.99 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 25 accessories http://www.howardscustoms.com/products/detail.asp?id=23 These footpegs are true billet, not a cheap forging or casting. Machined from aircraft quality aluminum. They feature a massive 1 1/2" mounting knuckle. Folding and locks into place while folding to avoid bending or breaking. that provides superior strength and support. Drilled and dimpled for a stylish look. We can provide these in three finishes: satin, show polish, and black anodized http://www.howardscustoms.com/img/products/Billet_Foot_Pegs_005.jpg USD 109.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 23 accessories http://www.howardscustoms.com/products/detail.asp?id=22 These footpegs are true billet, not a cheap forging or casting. Machined from aircraft quality aluminum. They feature a massive 1 1/2" diameter body that provides superior strength and support. Drilled and dimpled for a stylish look. We can provide these in three finishes: satin, show polish, and black anodized http://www.howardscustoms.com/img/products/Billet_Foot_Pegs_002.jpg USD 89.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 22 accessories http://www.howardscustoms.com/products/detail.asp?id=21 These footpegs are true billet, not a cheap forging or casting. Machined from aircraft quality aluminum. They feature a massive 1 1/2" diameter body that provides superior strength and support. Slotted for a simple and clean look. We can provide these in three finishes: satin, show polish, and black anodized http://www.howardscustoms.com/img/products/Billet_Foot_Pegs_001.jpg USD 89.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 21 accessories http://www.howardscustoms.com/products/detail.asp?id=16 Your basic black tee with the Howard's Killer Customs logo on the front and the Cross crest on the back. Low key. Get this shirt free with the purchase of any other item in our store. http://www.howardscustoms.com/img/products/shirt.jpg USD 19.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 16 accessories http://www.howardscustoms.com/products/detail.asp?id=15 An actual pool ball is taken and threaded 3/8-24 to fit most shifter applications. The main use is for a hand shift and foot clutch "suicide shift". Use on choppers and street rods, work trucks, etc. Other numbers available by request. http://www.howardscustoms.com/img/products/poolball.jpg USD 24.99 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 15 accessories http://www.howardscustoms.com/products/detail.asp?id=13 Fits: SandS "B" and "G" Style Carburetor This 1 inch billet aluminum carburetor space with paper felt gaskets helps to stabilize top end air flow for better engine performance. CNC machined from 6061 aluminum- not a casting! A spacer can also be used to solve air cleaner clearance problems as well. Great for Nitrous Oxide Systems! Can be drilled and tapped for NOS applications and/or a vacuum port. Satin finish. Add $5.00 for polished finish http://www.howardscustoms.com/img/products/BilletCarb spaceSS-G1inch002.jpg USD 34.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 13 accessories http://www.howardscustoms.com/products/detail.asp?id=12 Fits: All 1" handlebars. Also available in 7/8" for most metric and ATVs These custom handgrips are dimpled with a knurled finish. One of the easiest ways to add some style to your bike is with a pair of billet handgrips. Simple enough for anyone to install in just a few minutes. Machined from 6061 aluminum. http://www.howardscustoms.com/img/products/DimpledKnurledBilletHandgrips002.jpg USD 95.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 12 accessories http://www.howardscustoms.com/products/detail.asp?id=11 Fits: All 1" handlebars. Also available in 7/8" for most metric and ATVs These custom handgrips are dimpled with a smooth finish. One of the easiest ways to add some style to your bike is with a pair of billet handgrips. Simple enough for anyone to install in just a few minutes. Machined from 6061 aluminum. http://www.howardscustoms.com/img/products/DimpledSmothBilletHandgrips001.jpg USD 95.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 11 accessories http://www.howardscustoms.com/products/detail.asp?id=10 Fits: All 1" handlebars. Also available in 7/8" for most metric and ATVs These custom handgrips are knurled with horizontal grooves. One of the easiest ways to add some style to your bike is with a pair of billet handgrips. Simple enough for anyone to install in just a few minutes. Machined from 6061 aluminum. http://www.howardscustoms.com/img/products/GroovedKnurledBilletHandgrips 001.jpg USD 89.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 10 accessories http://www.howardscustoms.com/products/detail.asp?id=9 Fits: SandS "B" Series Carburetor Give a cool and functional look to and old but reliable carburetor. Constructed from 6061 billet aluminum, sectioned, welded and show polished for a true custom look. Ram air has a 3" air inlet and tapers to fits SandS "B" series carburetors only. Complete kit with air cleaner and stainless steel mounting hardware. Air cleaner colors available: red, blue, purple and white. http://www.howardscustoms.com/img/products/BModelRamAirSS001.jpg USD 149.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 9 accessories http://www.howardscustoms.com/products/detail.asp?id=8 Fits: All 1" handlebars. Also available in 7/8" for most metric and ATVs These custom handgrips have a knurled finish and includes all of the necessary throttle hardware. One of the easiest ways to add some style to your bike is with a pair of billet handgrips. Simple enough for anyone to install in just a few minutes. Machined from 6061 aluminum. http://www.howardscustoms.com/img/products/throttle_internal.jpg USD 265.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 8 accessories http://www.howardscustoms.com/products/detail.asp?id=7 Fits: All 1" handlebars. Also available in 7/8" for most metric and ATVs These custom handgrips have a knurled finish. One of the easiest ways to add some style to your bike is with a pair of billet handgrips. Simple enough for anyone to install in just a few minutes. Machined from 6061 aluminum. http://www.howardscustoms.com/img/products/Billet Knurled Handgrips 001.jpg USD 89.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 7 accessories http://www.howardscustoms.com/products/detail.asp?id=6 This carburetor features all of our latest tools and performance upgrades from our shop. Enhance your bike's performance and make it easier to maintain in one shot! http://www.howardscustoms.com/img/products/DSC00259.jpg USD 395.00 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 6 accessories http://www.howardscustoms.com/products/detail.asp?id=5 Enhance the look of your forward controls and add stopping power with this CNC machined brake reservoir. Made from 6061 aluminum. http://www.howardscustoms.com/img/products/DSC00220.jpg USD 129.99 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 5 accessories http://www.howardscustoms.com/products/detail.asp?id=4 Access your carburetor adjustments easily and without tools while on the road. Easy finger adjustment makes tuning your bike painless. Great for temperamental carburetors or in areas where climate changes can be drastic. http://www.howardscustoms.com/img/products/DSC00249.jpg USD 19.99 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 4 accessories http://www.howardscustoms.com/products/detail.asp?id=2 Add a custom look to your bike's engine with our Billet Ignition Covers. Easy installation using your existing point cover screws is easy enough for anyone to put on in just a few minutes. http://www.howardscustoms.com/img/products/DSC00230.jpg USD 35.99 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 2 accessories http://www.howardscustoms.com/products/detail.asp?id=1 These thumb screws provide easy, no-tools-needed, access to your carb's lower internals for on the road repairs or for tweaking that temperamental carburetor. http://www.howardscustoms.com/img/products/DSC00256.jpg USD 29.99 Check Visa MasterCard WireTransfer PayPal, credit cards, and bank transfers accepted. Howard's Killer Customs 100 New 2010-12-31 1 accessories